|
CLASSIFICATIONS: E80T5-B2L per AWS A5.29, ASME SFA 5.29
Select 85-B2L is intended for single and multiple pass welding of certain chromium-molybdenum steels, plate and pipe requiring 1 1/4% chrome and 1/2% molybdenum in the weld deposit. The basic slag limits welding to horizontal fillets and the flat position.
APPLICATIONS: Select 85-B2L is a good choice for welding thin walled A335-P11 pipe, and A213-T11 or A213-T22 tube in the as-welded condition or in applications where low hardness is required. The basic slag imparts better CVN toughness than rutile slag electrodes when welding these steels, which are used in the construction of boilers, heat exchangers and pressure vessels.
DIAMETERS: 1/16”, 5/64”, 3/32”
SHIELDING GAS: 100% CO2, 35-50 cfh
WELDING POSITIONS: Flat and Horizontal
CHARACTERISTICS:
Excellent mechanical properties with basic slag.
Better CVN toughness properties than rutile-slag electrodes.
Low weld metal hydrogen.
|
TYPICAL
MECHANICAL PROPERTIES |
| |
SR 1 Hr. at 1275° F |
| Ultimate Tensile Strength
(psi) |
89,000 |
| Yield Strength (psi) |
77,000 |
| Percent Elongation |
24 |
|
|
TYPICAL
DEPOSIT COMPOSITION |
| Wt% |
C |
Mn |
P |
S |
Si |
Cr |
Mo |
|
|
.03 |
.70 |
.010 |
.010 |
.40 |
1.26 |
.48 |
|
Notice: The results reported are based upon testing of the product under controlled laboratory conditions in accordance with American Welding Society Standards. Actual use of the product may produce different results due to varying conditions. An example of such conditions would be electrode size, plate chemistry, environment, weldment design, fabrication methods, welding procedure and service requirements. Thus the results are not guarantees for use in the field. The manufacturer disclaims any warranty of merchantability or fitness for any particular purpose with respect to its products.
|
