|
CLASSIFICATIONS: E71T-1C, E71T-9C per AWS A5.20, ASME SFA 5.20
Select 716 is an excellent choice for those applications requiring
enhanced all position capability, good mechanical properties, or
where carbon dioxide is the preferred shielding gas. This electrode
is designed for single and multiple pass welding of carbon steels.
APPLICATIONS: Select 716 is specially formulated to weld
over moderate rust and mill scale without trouble. Typical examples
of where this electrode can be used are railcar fabrication and
repair, shipbuilding and general steel fabrication.
DIAMETERS: .035", .045", .052", 1/16"
SHIELDING GAS: 100% CO2, 35-50 cfh
WELDING POSITIONS: All positions
CHARACTERISTICS:
Smooth arc transfer and low spatter.
Fast freezing slag facilitates all position capability.
|
TYPICAL
MECHANICAL PROPERTIES
|
| Ultimate Tensile Strength
(psi) |
79,500 |
| Yield Strength (psi) |
76,000 |
| Percent Elongation |
26 |
| CVN (ft-lb f)
@ 0° F |
93 |
| @
-20° F |
57 |
|
|
TYPICAL
DEPOSIT COMPOSITION
|
| Wt% |
C |
Mn |
P |
S |
Si |
|
|
.03 |
1.15 |
.010 |
.010 |
.35 |
|
RECOMMENDED WELDING PARAMETERS |
|
| Diam. |
Position |
Amps |
Volts |
WFS |
Amps |
Volts |
| 1/16" |
Flat |
350 |
29 |
300 |
150-400 |
22-34 |
| |
Overhead |
225 |
26 |
160 |
150-310 |
22-28 |
| |
Vertical up |
225 |
25 |
160 |
150-280 |
22-27 |
| .052" |
Flat |
300 |
28 |
360 |
100-330 |
19-32 |
| |
Overhead |
225 |
26 |
245 |
150-310 |
21-28 |
| |
Vertical up |
225 |
25 |
245 |
150-280 |
21-27 |
| .045" |
Flat |
250 |
28 |
282 |
100-300 |
21-32 |
| |
Overhead |
200 |
26 |
265 |
150-280 |
21-29 |
| |
Vertical up |
200 |
25 |
265 |
100-230 |
21-28 |
| .035" |
Flat |
200 |
27 |
600 |
125-250 |
21-30 |
| |
Overhead |
175 |
25 |
490 |
115-220 |
21-28 |
| |
Vertical up |
170 |
25 |
490 |
120-215 |
21-28 |
|
Notice: The results reported are based upon testing of the product under controlled laboratory conditions in accordance with American Welding Society Standards. Actual use of the product may produce different results due to varying conditions. An example of such conditions would be electrode size, plate chemistry, environment, weldment design, fabrication methods, welding procedure and service requirements. Thus the results are not guarantees for use in the field. The manufacturer disclaims any warranty of merchantability or fitness for any particular purpose with respect to its products.
|
