|
CLASSIFICATIONS: E110T5-K3C per AWS A5.29, ASME SFA 5.29
Select 115-K3 is a low alloy steel, gas-shielded, flux cored electrode
for horizontal fillet and flat position welding of certain HSLA
steels. This electrode is capable of single and multiple pass
welding. The arc transfer is globular with a convex bead profile
due to the nature of a basic slag system.
APPLICATIONS: Select 115-K3 produces weld metal with a minimum
tensile strength of 110 Ksi, excellent low temperature CVN toughness
and low diffusible hydrogen levels. These characteristics make 115-K3
an ideal selection for welding high strength, low alloy steels such
as T-1, ASTM A514 and HY-100; and for welding abrasion resistant
steels in the 300, 350 and 400 series.
DIAMETERS: .045", 1/16", 5/64", 3/32"
SHIELDING GAS: 100% CO2, 35-50 cfh
WELDING POSITIONS: Flat and Horizontal
CHARACTERISTICS:
Basic slag provides low diffusible hydrogen and excellent CVN
toughness.
Meets the same requirements as E11018-M covered electrodes.
Well suited for welding HSLA steels in the 110-130 Ksi tensile
range.
|
TYPICAL
MECHANICAL PROPERTIES |
| Ultimate Tensile Strength
(psi) |
116,000 |
| Yield Strength (psi) |
104,000 |
| Percent Elongation |
20 |
| CVN (ft-lb f)
@ -60° F |
39 |
|
|
TYPICAL DEPOSIT COMPOSITION |
| Wt% |
C |
Mn |
P |
S |
Si |
Ni |
Mo |
|
|
.04 |
1.64 |
.010 |
.010 |
.46 |
2.01 |
.46 |
|
SUGGESTED
WELDING PARAMETERS |
|
| Diam. |
Amps |
Volts |
WFS |
Amps |
Volts |
| 3/32" |
400 |
28 |
185 |
350-550 |
26-34 |
| 1/16" |
300 |
29 |
320 |
250-450 |
26-34 |
| .045" |
250 |
28 |
380 |
120-320 |
22-31 |
|
Notice: The results reported are based upon testing of the product under controlled laboratory conditions in accordance with American Welding Society Standards. Actual use of the product may produce different results due to varying conditions. An example of such conditions would be electrode size, plate chemistry, environment, weldment design, fabrication methods, welding procedure and service requirements. Thus the results are not guarantees for use in the field. The manufacturer disclaims any warranty of merchantability or fitness for any particular purpose with respect to its products.
|
