|
CLASSIFICATIONS: E110T1-K3C per AWS A5.29, ASME SFA 5.29
Select 110-K3 is a low alloy steel, gas-shielded, flux cored electrode
intended for single and multiple pass welding of certain high strength
steels in horizontal fillets and the flat position. Arc transfer
is a smooth spray and the weld bead exhibits clean slag removal
with a finely rippled surface.
APPLICATIONS: Select 110-K3 is an excellent product to weld
high strength steels such as
HY-100 and ASTM A514. The weld deposit
produces a minimum tensile strength of 110 Ksi with good subzero
CVN toughness. These steels are found in earthmoving equipment buckets,
offshore construction and cranes.
DIAMETERS: 1/16", 5/64", 3/32"
SHIELDING GAS: 100% CO2, 35-50 cfh
WELDING POSITIONS: Flat and Horizontal
CHARACTERISTICS:
Spray transfer with low spatter.
Excellent mechanical properties.
Weld composition matches that of E11018-M covered electrodes.
|
TYPICAL
MECHANICAL PROPERTIES |
| |
All Weld Metal As Welded |
| Ultimate Tensile Strength
(psi) |
116,000 |
| Yield Strength (psi) |
105,000 |
| Percent Elongation |
19 |
| CVN (ft-lb f)
@ 0° F |
38 |
|
|
TYPICAL DEPOSIT COMPOSITION |
| Wt% |
C |
Mn |
P |
S |
Si |
Ni |
Mo |
|
|
.06 |
1.74 |
.010 |
.010 |
.33 |
1.91 |
.48 |
|
RECOMMENDED
WELDING PARAMETERS |
|
| Diam. |
Amps
(DCEP) |
Volts |
WFS
(in/min) |
ESO |
Amps |
Volts |
WFS |
| 3/32" |
275-550 |
26/34 |
120-270 |
1 " |
450 |
31 |
210 |
| 5/64" |
280-430 |
26/33 |
140-300 |
1 " |
390 |
29 |
250 |
| 1/16" |
250-400 |
26/32 |
220-410 |
1" |
350 |
29 |
360 |
|
Notice: The results reported are based upon testing of the product under controlled laboratory conditions in accordance with American Welding Society Standards. Actual use of the product may produce different results due to varying conditions. An example of such conditions would be electrode size, plate chemistry, environment, weldment design, fabrication methods, welding procedure and service requirements. Thus the results are not guarantees for use in the field. The manufacturer disclaims any warranty of merchantability or fitness for any particular purpose with respect to its products.
|
